ONE PASS PERFECTION
- CULTIVATES TO A DEPTH OF UP TO 7”
- BURIES ROCKS, OVERGROWTH AND DEBRIS
- SCREENS THE SOIL FROM 1/2 “ - 2” IN SIZE
- PULVERIZES THE SOIL INTO A FINE TILTH
- LEVELS AND ROLLS, VIA COMPACTING ROLLER
- SOWS GRASS SEED WITH THE OPTIONAL HOPPER
- AVAILABLE IN 52” AND 60” WIDTHS
TO SUIT A RANGE OF SKID STEER LOADERS
|
|
The hydraulic-drive, BLECAVATOR FOR SKID STEER LOADERS is the ideal machine for preparing both small and large areas quickly and economically—only requiring one man and a skid steer loader to operate.
The BLECAVATOR concept is simple. A heavy duty contrarotating rotor equipped with special ‘bolt-on’ blades, digs into the ground, up to 7” deep, lifting and throwing the soil, rocks and debris (up to approx. 40 mph), against a sorting screen, mounted behind the rotor. The screen separates the rocks and debris, directing them into the bottom of the trench. The fine soil which passes through the screen is deposited over the top and leveled off. To complete the process a rear packer roll firms up the finished areas making them ready for seeding or sod laying.
The BLECAVATOR FOR SKID STEER LOADERS is equipped with a quick hitch system to allow fitment to all popular skid steer loaders like New Holland, John Deere, Bobcat, Case and more. The rear roll can be offset to enable close working to boundary walls and fences.
A heavy-duty transmission is fitted to the BLECAVATOR with a powerful hydraulic motor, which can drive the rotor in both directions.
An adjustable sorting screen is mounted behind the rotor. The screen is made up of high tensile round bars which can be easily positioned to give spacings of between 1/2” and 2” for all requirements and conditions. The tines are protected from large rock damage by the fitting of shock absorbing spring assemblies.
An adjustable leveling board mounted in front of the rear packer ensures an accurate level finish in all conditions. The rear packer roll compacts the surface which is essential for grass seeding or sod laying. The roll is wider than the working width of the rotor to enable each pass to “marry up”, eliminating any possible ridge effect. The roll is also used to control the digging depth of the rotor.
B L E C A V A T O R F O R S K I D S T E E R L O A D E R S
S P E C I F I C A T I O N S |
Model |
BV25H |
BV60H |
| Rotor Working Width |
51" |
60" |
Min. Oil Flow Req. |
12.2 Gallons per min |
|
Skid Steer Loader Type |
NEW HOLLAND – JOHN DEERE – BOBCAT – CASE |
Appox. Working Output |
15-25,000 sq. ft. per hour |
12-30,000 sq. ft. per hour |
Max. Digging Depth |
7" |
7" |
No. of Blades |
20 Off |
24 Off |
Standard Rear Rolls |
PACKER TYPE c/w SCRAPER BAR |
Optional Rear Rolls |
NOTCHED CAST RING OR SMOOTH FLAT TYPE |
Optional Seeder |
AVAILABLE FOR BOTH MODELS
|
Mounting Frame |
QUICK HITCH TYPE |
Weight |
990 lbs |
1100 lbs |
| Dimensions |
65"W, 48"L, 33"H |
73"W, 48"L, 33"H |
|
|
All dimensions and specifications are approximate, and BLEC USA reserves the right to alter them without prior notification. |
|
Return to Previous
