DEEP SEEDED RESULTS

  • CLOSE 2 " DISC SPACING
  • SHORT, COMPACT DESIGN
  • ACCURATE SEEDING
  • SEED DRILL INTO MOISTURE LINES
  • MINIMAL SURFACE DISTURBANCE
  • HIGH WORK RATE
  • 54", 72" AND 90" MODELS

The Blec Disc Seeder is the ideal machine for overseeding both small and large areas quickly and accurately, with minimal surface disturbance.

Overseeding can be achieved in many different ways, i.e. spiking, raking, spraying, tilling, spreading, silt seeding and finally disc seeding.

All the above ways are dependent upon one basic factor moisture - necessary for germination and sustained growth. The Blec Disc Seeder plants the seedlings directly into moisture lines at the correct depth for good germination and long term growth.

Close Disc Spacing of 2" permits a one pass operation and the angled position of the discs allow penetration even in compacted ground.

Constant depth control - by the side jack wheel assemblies or optional smooth roll, both with infinite screw adjustment.

Accurate Planting of the seeds is achieved by a stainless steel seed metering combined with a fluted rubber agitator rotor, which directs the seed into tubes to the coulter discs. Seeding rates between 4 - 40 gm per square yard are achieved.

A rear smooth roller close up the slits, leaving the surface ready to play. The roll can be ballast filled with water for extra weight. Ballast weights are supplied with the Disc Seeder and can be positioned at the front or rear of the seeder depending on the ground conditions.

Long life discs made from high quality heat treated steel, reduce cost to a bare minimum, compared to PTO driven cutting blades machines.

Combine the short compact design of the Disc Seeder with the high work rate of up to 5000sq. yards per hour and you have a machine that carries out your over-seeding tasks with ease.

D I S C S E E D E R    S P E C I F I C A T I O N S
Model Specifications
DSM1400
DS2000
DS2300
Tractor Requirement
25-45 HP
45-80 HP
60-100 HP
Working Width
56"
74"
90"
Speed Hipper Capacity
121 LBS
154 LBS
187 LBS
Working Output
3000-4000 Sq. Yards Per Hour
4000-5000 Sq. Yards Per Hour
5000-6000 Sq. Yards Per Hour
Seed Rate
5 - 40 GM Per SQ. Yard
5 - 40 GM Per SQ. Yard
5 - 40 GM Per SQ. Yard
Shipping Size
106 x 105 x 110 CM
220 x 110 x 110 CM
260 x 120 x 110 CM
Width x Length x Height
63" x 42" x 44"
87" x 44" x 44"
103" x 48" x 44"
Shipping Weight
942 LBS
1760 LBS
2167 LBS
All dimensions and specifications are approximate, and BLEC USA reserves the right to alter them without prior notification.

Return to Previous